The 818-ST2-IR/DB is a brand new thin-profile, wand IR detector with a sturdy metal housing. Incorporating a large area 10 mm X 10 mm Ge photodiode, this slim optical sensor is ideal for laser and other optical power measurements in tight locations with busy setups. It even provides a built-in calib..
The 818-ST2/DB is a newly redesigned thin-profile, wand detector with a sturdy metal housing. Incorporating a large area 10 mm X 10 mm Si photodiode, this slim optical sensor is ideal for laser and other optical power measurements in tight locations with busy setups. It even provides a built-in cali..
The 818-ST2-UV/DB is a thin-profile, wand detector with a sturdy metal housing. Incorporating a large area 10 mm X 10 mm UV Enhanced Silicon (Si) photodiode, this slim optical sensor is ideal for laser and other optical power measurements in tight locations with busy setups. It even provides a built..
The 918D-ST-IR is a newly redesigned thin-profile, wand detector with a sturdy metal housing. Features include integrated calibration-data storage, built-in OD3 attenuation filter with automatic On/Off detection, and temperature sensing electronics for temperature drift compensation. use the atten..
The 918D-ST-SL is a newly redesigned thin-profile, wand detector with a sturdy metal housing. Features include integrated calibration-data storage, built-in OD3 attenuation filter with automatic On/Off detection, and temperature sensing electronics for temperature drift compensation. Incorporating a..
The 918D-ST-UV is a newly redesigned thin-profile, wand detector with a sturdy metal housing. Features include integrated calibration-data storage, built-in OD3 attenuation filter with automatic On/Off detection, and temperature sensing electronics for temperature drift compensation. Incorporating..
The 818-FA2 is a bare fiber holder mount for Newport's photodiode detectors. An optical fiber can be loaded on Model FP3-FH1 Bare Fiber Holder, available separately for purchase, which is inserted into 818-FA2. Please note that Newport does not calibrate the detectors with any of these adapters im..
The FP3-FH1 Bare Fiber Holder is a cleverly designed fiber clamp that is used to hold 250 μm bare fibers without damaging the fiber. It in turn plugs into the 818-FA2 Bare Fiber Holder Mount which allows one to attach the assembly to the front end of the detector housing.The FP3-FH1 combined with..
The 71686 Detector Calibration Modules is a BNC to DB15 interface adapter which allows any Oriel amplified Silicon or Germanium detector to function with the Newport 19xx-R/29xx-R Optical Power Meter family. The power meter displays the output of the detector as a voltage reading.It may also be used..
The 71683 Detector Calibration Module is a BNC to DB15 interface adapter which allows any Oriel unamplified Silicon or Germanium detector to function with the Newport 19xx-R/29xx-R Optical Power Meter family. With this module connected, the power meter will display the detector output as a current r..
The 818-FA Connectorized Fiber Adapter Mount allows FP3/FP4 fiber connector adapters to be connected to 818/918/918D series detectors. Adapters are attached to the 818-FA Fiber Adapter Mount with two screws, allowing for easier insertion and unplugging of fiber optic connectors.Please note that New..
The 71617 Amplified Germanium Photodetector has a built-in trans impedance amplifier. This uncalibrated 5 mm diameter Germanium detector has a broad spectral range from 700 to 1800 nm. The amplifier enables selectable gain levels from 104 V/A to 109 V/A. It also offers three selectable time constant..